[Equest-users] sloped roof in equest

deepika khowal deepika.khowal at gmail.com
Wed Oct 13 09:14:58 PDT 2010


thanks all

I actually succeeded in making anew polygon to create the new roof....
However, in the triangle shaped side wall of the sloping roof, I want to add
glass for skylight. the polygon properties does not allow me to add triangle
shaped glass to the roof.
Is there a way to do it?
Thanks
Regards
Deepika

On Wed, Oct 13, 2010 at 12:23 AM, Carol Gardner <cmg750 at gmail.com> wrote:

> Deepika,
>
> One of the common mistakes I make when I create a roof in DD edit is
> forgetting to locate it at the right height. Make sure your z=building
> height or wall height, whichever is appropriate. It's not too hard to do
> this in DD edit as long as you keep track of the x, y, z, tilt and azimuth.
> Kudos for you for tackling it!
>
> Carol
>
>   On Tue, Oct 12, 2010 at 5:08 PM, John Aulbach <jra_sac at yahoo.com> wrote:
>
>>    Which is why you keep a Wizard copy of your file. When I convert to
>> the Detailed Edit mode, I *save as* FILENAME-DETAIL. Then if I need to go
>> back, I have my original Wizard file.
>>
>>
>> John R. Aulbach, PE, CEM
>>
>> Senior Energy Engineer
>>  ------------------------------
>>
>> *Partner** **Energy*
>>
>> 1990 E. Grand Avenue, El Segundo, CA 90245
>> W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
>>
>> www.ptrenergy.com | jaulbach at ptrenergy.com <%7C%20jaulbach at ptrenergy.com>
>>
>>  ------------------------------
>> *From:* "Wolfe, Brian" <bwolfe at hksinc.com>
>> *To:* deepika khowal <deepika.khowal at gmail.com>; "
>> equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
>> *Sent:* Tue, October 12, 2010 1:37:35 PM
>> *Subject:* Re: [Equest-users] sloped roof in equest
>>
>>  Equest won’t allow you to create in the wizard then, switch out of the
>> wizard to make changes then, back again with the changes made.  Once you
>> switch out of the wizard, you stuck.
>>
>>
>>
>> BRIAN J. WOLFE, CDT, LEED AP BD+ C
>>
>> SUSTAINABLE DESIGN COORDINATOR
>>
>> HKS, INC.
>>
>> 1919 McKINNEY AVENUE
>>
>> DALLAS, TX 75201
>>
>> 214.969.5599 ext.3669
>>
>> bwolfe at hksinc.com
>>
>> www.hksinc.com
>>
>> If you are sending file(s) always use my *Thru DROPBOX*<https://hks.thruinc.net/drop_box.asp?toemail=bwolfe@hksinc.com>
>>
>>
>>
>> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
>> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *deepika khowal
>> *Sent:* Tuesday, October 12, 2010 3:16 PM
>> *To:* equest-users at lists.onebuilding.org
>> *Subject:* [Equest-users] sloped roof in equest
>>
>>
>>
>> Hi All
>>
>>
>>
>> I am trying to model a sunroom which has sloped roof.
>>
>> I made the model in SD wizard but when am changing the vertices in the
>> design data model mode to change the roof to sloped,  am not able to save
>> the changes if I open the wizard again.
>>
>> Also if I create a new polygon (triangle shaped to complete the sloped
>> roof), am not able to see that in my model.
>>
>> if anyone have any inputs, it will be highly appreciated.
>>
>>
>>
>> Thanks
>>
>> Regards
>>
>> Deepika
>>
>>
>>
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
> Carol Gardner PE
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101013/56e5b87f/attachment-0002.htm>


More information about the Equest-users mailing list