[Equest-users] Copying Building Geometry

[Christian Stalberg]

There are several ways to do this. One is to go into your filesystem, find
the eQUEST projects folder, then copy your existing project folder to a new
one and rename the later. Then you might want to open the project itself in
the new folder and do a File =>Save As and rename it.
 

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Erik Weiss
Sent: Wednesday, October 20, 2010 3:26 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Copying Building Geometry

I am have created a building and i need to run 3 separate models of the same
building. i would like to be able to copy the building geometry (as well as
any zones created) into a new project. Is there anyway to do this 




_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG