[Equest-users] LEED Glazing input

[Carol Gardner]

Christie,

Win5 is a good tool to use to get your assembly U values. You can also put
glass and frame information into eQUEST directly and check your output for
reasonableness.

Carol

On Mon, Oct 18, 2010 at 4:47 PM, Rimes, Christie
<Christie.Rimes at wspfk.com>wrote:

>  Hi,
>
>
>
> I have just noticed that the 90.1 baseline window parameters are for the
> entire assembly i.e. glazing and frame.
>
> In eQuest it only asks for the glazing parameters to be entered. How do
> people go about this?
>
>
>
> Cheers,
>
>
>
> [image: Christie Rimes, Building Simulation Analyst WSP Flack + Kurtz 405
> Howard Street, Suite 500 San Francisco, CA 94105 Direct: 415.402.2727 Main
> Tel: 415.398.3833 Fax: 415.433.5311 website: http://www.wspfk.com vCard:
> http://vcards.wspfk.com/vcardloader.php?filename=flackkurtz-christie-rimes-wspfk-com-1255981339.vcf
> image:]
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101020/1e0e51a9/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 10665 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101020/1e0e51a9/attachment-0002.png>