[Equest-users] multiple floor zones

[atowell at cxegroup.com]

Sheri-

The best way that I have seen to do this is to create a separate shell for each floor, then zone each floor individually. I hope this helps!

Adam Towell
CxE Group, LLC
618-659-9461

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Sheri
Sent: Tuesday, April 05, 2011 12:21 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] multiple floor zones

Hello,

I have a 3 story building that each floor has multiple zones. How do I do this? When I go into the zoning pattern (which I have selected custom) it brings up my footprint so I can draw out my zones, but how do I know which floor I am on & how do I switch between floors?

Thank you,

Sheri Rice,
Assistant General Manager
Fire & Ice Geothermal, LLC
198276 E County Road 41
Woodward, OK 73801
580-256-9439 Voice
580-256-7080 Fax
580-216-1005 Cell

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110405/f1e6e359/attachment-0002.htm>