[Equest-users] Changing wall types in detailed edit mode

[Mark Darrall]

Thanks to all for the help on-list and off with this! Since I only have two relatively small walls to fix, I'll try doing it in the .inp file. I'll save the original one under a new name just in case...

MARK DARRALL, AIA, LEED AP BD+C, NCARB
Senior Project Manager

[cid:image001.jpg at 01CBFF32.74221730]

DESIGN ENRICHING LIFE // LIFE ENRICHING DESIGN

A2SO4 Architecture, LLC
Union Station
300 South Meridian Street / 250
Indianapolis, Indiana 46225
TEL  317 388 8850
FAX  317 280 0692
MOB 765 749 0841
www.a2so4.com

Please consider the environment before printing this e-mail.

CONFIDENTIALITY NOTICE: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this email in error, please notify the sender immediately and delete the original message. Neither the sender nor the company for which he or she works accepts any liability for any damage caused by any virus transmitted by this email.

From: Patrick J. O'Leary, Jr. [mailto:poleary1969 at gmail.com]
Sent: Monday, April 18, 2011 3:55 PM
To: Mark Darrall
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Changing wall types in detailed edit mode

or open the .inp file w/notepad or your favorite text editor & change it there.

exterior definition:
"EL1 North Wall (G.C10.I42)" = INTERIOR-WALL
   NEXT-TO          = "OFFICE-183 (f1.s9)"
   CONSTRUCTION     = "Interior Wall Construction"
   LOCATION         = SPACE-V3
   ..

interior definition:
"EL1 West Wall (G.ENE9.E14)" = EXTERIOR-WALL
   CONSTRUCTION     = "90.1-2004 Exterior Wall"
   LOCATION         = SPACE-V2
   SHADING-SURFACE  = YES
   ..



On 4/18/11 12:15 PM, Mark Darrall wrote:
Thank you! I'll try that.

MARK DARRALL, AIA, LEED AP BD+C, NCARB
Senior Project Manager

[cid:image001.jpg at 01CBFF32.74221730]

DESIGN ENRICHING LIFE // LIFE ENRICHING DESIGN

A2SO4 Architecture, LLC
Union Station
300 South Meridian Street / 250
Indianapolis, Indiana 46225
TEL  317 388 8850
FAX  317 280 0692
MOB 765 749 0841
www.a2so4.com

Please consider the environment before printing this e-mail.

CONFIDENTIALITY NOTICE: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this email in error, please notify the sender immediately and delete the original message. Neither the sender nor the company for which he or she works accepts any liability for any damage caused by any virus transmitted by this email.

From: equest-users-bounces at lists.onebuilding.org<mailto:equest-users-bounces at lists.onebuilding.org> [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of M. Shields
Sent: Monday, April 18, 2011 3:03 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: Re: [Equest-users] Changing wall types in detailed edit mode

I do not think it is possible to change a wall from interior or exterior directly, if it is I haven't figured out how. I think the quickest way to do this is create a new exterior wall and then put it in the same place as the existing interior wall and then delete the interior wall.

From: equest-users-bounces at lists.onebuilding.org<mailto:equest-users-bounces at lists.onebuilding.org> [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Mark Darrall
Sent: Monday, April 18, 2011 2:36 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] Changing wall types in detailed edit mode

Hi,

I'm rebuilding a model for LEED submittal. I've done the baseline model and now want to edit it to create the design model (I know this is backwards). I just found that I have some exterior walls that were made using an interior wall construction. When I open the properties of that wall, I can change it to EWall with the dropdown, but it doesn't change its designation icon.

Thanks,

MARK DARRALL, AIA, LEED AP BD+C, NCARB
Senior Project Manager

[cid:image001.jpg at 01CBFF32.74221730]

DESIGN ENRICHING LIFE // LIFE ENRICHING DESIGN

A2SO4 Architecture, LLC
Union Station
300 South Meridian Street / 250
Indianapolis, Indiana 46225
TEL  317 388 8850
FAX  317 280 0692
MOB 765 749 0841
www.a2so4.com

Please consider the environment before printing this e-mail.

CONFIDENTIALITY NOTICE: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this email in error, please notify the sender immediately and delete the original message. Neither the sender nor the company for which he or she works accepts any liability for any damage caused by any virus transmitted by this email.






_______________________________________________

Equest-users mailing list

http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110420/46547f3c/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2061 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110420/46547f3c/attachment-0002.jpg>