[Equest-users] v3.64 error

[Kristin Gustafson]

Windows Vista may be the culprit in my case. 

Thanks to everyone for your input (and commiserating!)

 

 

From: Paul Diglio [mailto:paul.diglio at sbcglobal.net] 
Sent: Thursday, April 21, 2011 9:12 PM
To: John Aulbach; Bruce Easterbrook; deepika khowal
Cc: Kristin Gustafson; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] v3.64 error

 

I have a new Toshiba laptop running Windows 7.  I occasionally have a problem with the program crashing.  This happens when I switch back to Wizard mode after entering the Detailed Mode.  When I click Finish on the Design Development Wizard Project Navigator Window.  The error is an invalid argument encountered.

If I close eQuest and reopen then switch back to Detail Mode, some of the data is missing, such as shell components.

Paul Diglio

 

 

________________________________

From: John Aulbach <jra_sac at yahoo.com>
To: Bruce Easterbrook <bruce5 at bellnet.ca>; deepika khowal <deepika.khowal at gmail.com>
Cc: Kristin Gustafson <kgustafson at eypae.com>; equest-users at lists.onebuilding.org
Sent: Thu, April 21, 2011 8:41:42 PM
Subject: Re: [Equest-users] v3.64 error

My two cents. I was having trouble running ANY 3.64 projects in Windows Vista. When my Windows version was upgraded to Windows 7, all problems ceased.

 

I have also had no problems in Windows XP.

 

Happy Easter all !!

 

John Aulbach

 

________________________________

From: Bruce Easterbrook <bruce5 at bellnet.ca>
To: deepika khowal <deepika.khowal at gmail.com>
Cc: Kristin Gustafson <kgustafson at eypae.com>; equest-users at lists.onebuilding.org
Sent: Thu, April 21, 2011 5:00:40 PM
Subject: Re: [Equest-users] v3.64 error

I have had no problems with 3.64 and use it almost exclusively.  I did notice there were problems with users opening models in 3.64 that were created in 3.63.  I just run both for now until my 3.63 projects are completed.
Bruce Easterbrook P.Eng.
Abode Engineering

On 21/04/2011 06:23 PM, deepika khowal wrote: 

I had hard time with 3.64 with many unknown errors.  

I would advice switch back to 3.63

Deepika

On Wed, Apr 20, 2011 at 12:44 PM, Kristin Gustafson <kgustafson at eypae.com> wrote:

I’ve just installed v3.64, and am getting this error when trying to simulate my model (created in v3.63b). I’m not seeing anything online to solve it – anyone dealt with this before?

 

Thanks,

 

Kristin Gustafson EIT, LEED® GA 

Energy Analyst

 

EYP

Architecture & Engineering

EYP Energy / NanoFab East / 257 Fuller Rd - 1st Floor / Albany / NY 12203

T 518 438 3720 / C 518 527 3673 / eypae.com <http://www.eypae.com/> 

 

/ 2010 Best Firm to Work For


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

 
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110422/9b655430/attachment-0002.htm>