[Equest-users] Shifting one building post simulation

[Rob Hudson]

To rotate any building in the model, simply click on your component tree and
click on "Building Data".  Here you can change the Azimuth of the building,
which will rotate everything in it by the number of degrees that you enter.

The weather change requires more work.  First you need to have the weather
file you want to use downloaded already.  To check go to My Documents -
eQuest 3.64 Data - Weather - and then look in the next few folders for the
city that you want.  If you cannot find it, a simple way of getting it is
starting a new equest model and in the wizard locate the city you want.  No
need to change anything else in the wizard, run the model results and let
the program find the file for you.  Go back to the Weater folder and write
down the location of the file and its name, ie mine is for Rochester NY, so
TMY2/ROCHESNY.bin

Next in your working model, go to the component tree, double click on the
"Project: xxxx" and on the first tab and change the weater file name to what
you wrote down before.  it will come up with a screen that says something
changed. Just select no and be on your merry way!

Hope this helps!

Rob

On Mon, Apr 25, 2011 at 1:42 AM, Kushagra Juneja <kce4 at kamalcogentenergy.com
> wrote:

>  Dear All,
>
>
>
> There is a project I am working on which has 13 buildings. The eQuest model
> was made and results were obtained. However, I now wish to change the
> location of one building out of these thirteen within the model including
> its orientation; though the design of the building shall remain the same.
> Looking forward to know if such a possibility exists? If yes, how should it
> be approached?
>
>
>
> Many Thanks
>
>
>
> Kushagra Juneja
>
> Project Engineer
>
> Kamal Cogent Energy Private Limited,
>
> 1st Floor, Kamal Ratan Chambers
>
> Opposite GPO, Jaipur- 302001
>
> Rajasthan
>
> Ph: 0141- 2373184
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110425/e83d33a0/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Rotate Building.JPG
Type: image/jpeg
Size: 415468 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110425/e83d33a0/attachment-0002.jpeg>