[Equest-users] VRV Low Speed EIR Curve Coefficients

Omar Salaymeh omar at zonengineering.com
Tue Aug 2 11:14:24 PDT 2011


Hi Janne,
In the past I have used the "RESVVT-Cool-EIR-LoSpeed-fEWB&OAT" curve to model the EIR of the compressor at low speed.

Omar

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Janne Kairento
Sent: July-28-11 2:27 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] VRV Low Speed EIR Curve Coefficients

Hello All,

I was hoping someone out there would be willing to share with me the coefficients that they used for the 'Low Speed Electric Input Ratio Curve'. I'm looking for a sanity check to see if my curve is serviceable or not.

Thank You for any help in advance!

Cheers,

Janne Kairento LEED AP
Designer
B2Q Associates, Inc.
146 Main Street
North Andover, MA 01845
Office: 978.208.0609 x209
Fax: 978.719.6339
Mobile: 978.210.7397
www.b2qassociates.com<http://www.b2qassociates.com/>

The contents of this e-mail and any attachments are confidential and the property of the B2Q Associates, Inc. The e-mail contents are only to be used by the intended recipient of the e-mail. If you are not the intended recipient then use, disclosure, copying, distribution or reliance on the e-mail is prohibited. All professional advice from us should be obtained in writing (not e-mail).



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110802/0a328d42/attachment.htm>


More information about the Equest-users mailing list