[Equest-users] Low Cooling loads, Big Cooling Electric Consump

[anura perera]

Hi Fredrico,


Also please check the fan/pump supply heads and efficiency values


Anura
**


**

*
*

*From:* steinvor at msu.edu [mailto:steinvor at msu.edu]
*Sent:* Thursday, August 25, 2011 12:09 AM
*To:* equest-users at lists.onebuilding.org
*Subject:* [Equest-users] Low Cooling Loads, Big Cooling Electric
Consumption



 Hello All:

In a recent project, my model doesn't have a designed HVAC system, so I'm
modeling my proposed the same as the baseline. Baseline system is #8
(chilled water) with FPF's, climate zone 1. Even though I'm getting lower
cooling loads for the proposed building, the electric load corresponding to
cooling the building is higher than the baseline. Fans and pumps consumption
is increasing this value. What can be causing this, how can this value be
reduced?

Thanks!
Federico
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110827/4c59217e/attachment.htm>