[Equest-users] AutoCad

[David C. Fishel]

Hi Anthony,

I found if you draw a poly line in AutoCAD around the perimeter and zones you want to identify and import just the polylines it works great.  Also one of the buttons on the draw screen you should select snap setting that make it easier to snap points to your drawing and not the grid.



-David

David C. Fishel, PE, LEED AP
Senior Energy Analyst

RLF | architecture engineering interiors
145 Lincoln Avenue, Winter Park, Florida 32789
p 407.647.1039 | f 407.629.9409 | www.rlfae.com<http://www.rlfae.com/>

AIA Florida's 2010 Firm of the Year
P Please consider the environment before printing this e-mail


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Anthony Sandonato
Sent: Thursday, August 11, 2011 5:27 PM
To: equest-users at lists.onebuilding.org; equest-users-onebuilding.org-confirm+adde5037201b9c4e79fd2142876d46f31a631768 at lists.onebuilding.org
Subject: [Equest-users] AutoCad

Hello all,

I am new to eQUEST and am having trouble importing an auto cad file.  The doors and ramps will show up once imported however the building envelope does not.  I was wondering what is wrong it is a dwg file.


Thank you


E-mail correspondence to and from this sender may be subject to the North Carolina Public Records Law and may be disclosed to third parties.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110812/6d622509/attachment-0002.htm>