[Equest-users] Heating Capacity

[Keith Swartz]

David,

The value simply needs to be a negative number. Put a negative sign in front of your value and you should be fine.

________________________________
Keith Swartz, P.E., LEED AP

Energy Engineer / Senior Project Manager
Energy Center of Wisconsin
455 Science Drive, Suite 200, Madison, WI 53711
Phone: 608.238.8276 x123
Fax: 608.238.0523

The Buildings Team
Design decisions through energy, economics and emissions analysis.
www.ecw.org/Buildings<http://www.ecw.org/Buildings>

Energy Center University
Your gateway to sustainable design training and online education programs.
www.ecw.org/university/<http://www.ecw.org/university/>
From: David Bower [mailto:dave.bower at aescny.com]
Sent: Saturday, August 20, 2011 9:30 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Heating Capacity

I have been trying to enter the "Heating Capacity" field and I get the following error "Input Value must be <=0".   Does anyone know what the parameter I am lacking to limit this to less than 0.

Thanks,
Dave Bower
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110822/0a3bdd7b/attachment-0002.htm>