[Equest-users] CHW error message

Varkie C Thomas thomasv at iit.edu
Thu Dec 15 14:44:07 PST 2011


Robby: This project is being done by an architect who used DD.  I looked for the error in CHW plant and forgot to look at HVAC supply temps.  I was mistaken, the Detailed Edit does allow you to set CHWS temp but not SD and DD.  Varkie



----- Original Message -----
From: Robby Oylear <robbyoylear at gmail.com>
Date: Thursday, December 15, 2011 4:29 pm
Subject: Re: RE: [Equest-users] CHW error message
> Whoops, here's the image I meant to send with the detailed edit 
> screen:[image: image.png] 
> 
> On Thu, Dec 15, 2011 at 2:29 PM, Robby Oylear 
> <robbyoylear at gmail.com> wrote: 
> 
> > Varkie, 
> > 
> > On wizard screen 3 of 3 under "CHW Plant Equipment" the setpoint is 
> > defined.  The default is 44 deg F. 
> > 
> > [image: image.png] 
> > 
> > In detailed edit mode this setpoint can be seen on the 
> "Circulation Loop 
> > Properties" screen: 
> > [image: image.png] 
> > 
> > On Thu, Dec 15, 2011 at 2:22 PM, Varkie C Thomas 
> <thomasv at iit.edu> wrote: 
> > 
> >> Kelsey, Robby, 
> >> 
> >> Thanks.  The supply air temp was too low.  What CHWS temp does 
> eQUEST>> assume?  This should be an input value too, besides temp 
> rise.>> 
> >> Varkie 
> >> ** 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111215/10616fb2/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: thomasv.vcf
Type: text/x-vcard
Size: 308 bytes
Desc: Card for Varkie C Thomas <thomasv at iit.edu>
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111215/10616fb2/attachment-0002.vcf>


More information about the Equest-users mailing list