[Equest-users] dome roof
Vikram.Sami at perkinswill.com
Wed Dec 21 05:49:43 PST 2011
Possibly - if you really do want the dome.
I suspect you won't see too much of a difference in performance between the dome and a pyramid of the same volume.
Vikram Sami, LEED AP BD+C
Sustainable Design Analyst
1315 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462 f: 404.892.5823 e: vikram.sami at perkinswill.com www.perkinswill.com<http://www.perkinswill.com/>
Perkins+Will. Ideas + buildings that honor the broader goals of society
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Rick DeMarinis
Sent: Wednesday, December 21, 2011 8:21 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] dome roof
I am creating an eQuest model of the State Capitol building in Helena, MT. I would like the 3-D model of the building to have a dome-like roof for the center section of the building to represent the actual building construction. Is the best way to do this using the polygon command and figure out a geodesic dome construction??
Thanks for any insights,
Rick DeMarinis, PE
CTA Architects Engineers
316 N. Last Chance Gulch
Helena, MT 59601
This email and any files transmitted with it are confidential and intended solely for the addressee. If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users