[Equest-users] Process flow on hot water loop

[Fleming, Joe]

Could be a few things, you might need to upload your .inp file for this one.

Joe Fleming
E.I., LEED AP BD+C, BEMP
Mechanical Engineer II

TLC Engineering for Architecture
Your 2030 Challenge Partner

800 Fairway Drive, Suite 250
Deerfield Beach, FL 33441-1816

phone:

954-418-9096

fax:

954-418-9296

direct:

954-418-4591

website:

www.tlc-engineers.com<http://www.tlc-engineers.com/>


[cid:image001.gif at 01CBD280.265D80E0]<http://www.tlc-engineers.com/>

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of R B
Sent: Tuesday, February 22, 2011 11:00 AM
To: eQUEST Users List
Subject: Re: [Equest-users] Process flow on hot water loop

I sent this message yesterday but it did not show up on the list - so here it is again.
I am simulating the domestic hot water consumption as process flow on the hot water loop. But it is not showing up in the results (the beps report is same with 0 gpm vs 11.1 gpm, and the schedule is non-zero). Am I missing something or is there a bug?
-Rohini


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110222/96027fc2/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 5272 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110222/96027fc2/attachment-0001.gif>