[Equest-users] Changing HVAC System EER/SEERs

[Steve Burley]

I should have said that I experience this problem in the DD Wizard.

 

Steven Burley

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Steven
Burley
Sent: 19 February 2011 19:32
To: eQUEST Users
Subject: [Equest-users] Changing HVAC System EER/SEERs

 

I am trying to model an ASHRAE 90.1 baseline building and consequently
want to change the EER/SEER for the various HVAC systems from the
default value to that in the standard. The program seems to accept the
change but it does not persist, i.e. I make the change for the relevant
unit sizes and when I check back it has reverted to the default values.

 

All help appreciated.

 

Regards,

Steve Burley


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

________________________________

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1435/3453 - Release Date: 02/19/11

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110220/b03da1d1/attachment-0002.htm>