[Equest-users] crashing of dry cooler with load reset

[Xavier Garcia]

Hi,
eQuest crashes when implementing reset load on CW loop with a dry cooler. It doesn't happen with the other cooling elements (open tower, tower w/ HTX, Fluid cooler). I guess is due to a problem with the formulation of the heat exchanger associated to the dry cooler, but no way to debug. Did anyone find a workaround for this problem?
Attached a simple Wizard example with dry cooler and load reset to reproduce the crashing.
Regards,
Xavier
____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110705/cc120778/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dry_cooler_load_resset.inp
Type: application/octet-stream
Size: 56108 bytes
Desc: dry_cooler_load_resset.inp
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110705/cc120778/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dry_cooler_load_resset.pd2
Type: application/octet-stream
Size: 5549 bytes
Desc: dry_cooler_load_resset.pd2
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110705/cc120778/attachment-0001.obj>