[Equest-users] Air Supply Temperature

Carol Gardner cmg750 at gmail.com
Fri Jul 1 08:33:47 PDT 2011


Patrick,

Yes you can exceed 70. You need to change the temperature in the schedule,
too. So figure out what the name of the schedule is and open it up and
change all the 70s in it to whatever temperature you want.

Carol

On Fri, Jul 1, 2011 at 7:11 AM, Patrick Keeney <
38keeney at cardinalmail.cua.edu> wrote:

> Hello All,
>
> I am trying to set an air supply temperature of 75 deg F, but it seems that
> eQUEST will not allow me to set a temperature above 70 deg F.  The input
> that I am controlling is under the Air-Side Cooling Tab, titled "Zone
> Entering Min Supply Temp."
>
> Can anyone verify if this is correct that I cannot enter an air supply
> temperature higher than 70 deg F?
>
> Best,
>
> Patrick
>
> --
> Patrick J Keeney
> MArch-MSSD Candidate
> 410-299-5627
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110701/e9a9914e/attachment-0002.htm>


More information about the Equest-users mailing list