[Equest-users] Utility rates and data entry

[Carol Gardner]

To be the most relevant the rate should come from the local utility(ies)
that will service the building you are modeling.

On Wed, Jul 6, 2011 at 10:20 AM, <tblack_pe at cox.net> wrote:

> Hello All:
>
> I am having trouble with the input of the utility rate.  Is the rate file
> supposed to come from the utility, or can I just input a rate and model the
> relative savings?
>
> Best regards,
>
> Tracy A. Black, P.E.; LEED AP
> 5002 E Redfield Road
> Scottsdale, AZ 85254-2848
> h:  602-569-8347
> c:  602-332-7197
> tblack_pe at cox.net
> http://www.linkedin.com/in/**tblackpeleedap<http://www.linkedin.com/in/tblackpeleedap>
> ______________________________**_________________
> Equest-users mailing list
> http://lists.onebuilding.org/**listinfo.cgi/equest-users-**onebuilding.org<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE@**ONEBUILDING.ORG<EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
>



-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110706/e65c1903/attachment-0002.htm>