[Equest-users] Copeland semi-hermetic compressor curves

[Carol Gardner]

Look in the DOE2.2 Volume 2r manual under compressors. There are some
different rules for the curves for this equipment.

Carol

On Sun, Jul 10, 2011 at 7:15 PM, Jaya Mukhopadhyay <jaya_mukho at yahoo.com>wrote:

> Hello:
> I am trying to simulate semi-hermetic discus compressors by Copeland in
> eQUEST.
> Could anybody help me with the power and capacity curves that I could use
> in my model?
> Or
> Could you point to references that I could use to obtain this information.
> Any help is greatly appreciated.
> Thanks
> Jaya
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110710/d06f6cbc/attachment-0002.htm>