[Equest-users] insufficient heating capability
DongEun Kim
equested at gmail.com
Sun Jul 24 17:16:39 PDT 2011
Thank you John,
But isn't airflow supposed to be auto-sized if not specified?
I intentionally leave the flowrate blank to let the program calculate the
cfm that serves load the best.
Should still I specifiy cfm?
DE
2011/7/23 John Aulbach <jra_sac at yahoo.com>
> Try increasing airflow.
>
> *From:* DongEun Kim <equested at gmail.com>
> *To:* equest-users at lists.onebuilding.org
> *Sent:* Friday, July 22, 2011 12:13 AM
> *Subject:* [Equest-users] insufficient heating capability
>
> Hi eQuesters!
>
> Can anyone help me here?
>
> I installed main heating coil as well as reheat coil with delta T=30.
>
> Heating capacity and cfm is not defined so that they will be auto-sized.
>
> And, I keep having this warning saying that the system "might have
> insufficient heating capability."
>
> I increased "Zone Entering Max Supply Temp", "Hot Deck Max Leaving
> Temp." But, the problem stays.
>
>
> How do I increase the heating capability?
> Thank you !!
>
> DE
>
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110725/071428fb/attachment-0001.htm>
More information about the Equest-users
mailing list