[Equest-users] Continuous walls with stepped thickness
Sami, Vikram
Vikram.Sami at perkinswill.com
Wed Jul 27 13:42:12 PDT 2011
Tracy,
Couldn't you aggregate the thicknesses (if half the wall is 8" & the other half is 6", use a 7" wall and split the difference (if it's not exactly half - prorate the difference).
Vikram Sami, LEED AP BD+C
Sustainable Design Analyst
1315 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462 f: 404.892.5823 e: vikram.sami at perkinswill.com www.perkinswill.com
Perkins+Will. Ideas + buildings that honor the broader goals of society
-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of tblack_pe at cox.net
Sent: Tuesday, July 26, 2011 6:32 PM
To: eQuest users
Subject: [Equest-users] Continuous walls with stepped thickness
All:
I have looked through the manuals and do not seem to find a direct
reference for this subject. The walls in this building are 8" thick
below about 10-12 feet. The drawings I have do not show that part yet.
Then above the 10-12 feet the walls are 6" thick. The model is already
built. Is there any simple way to deconstruct the existing walls and
replace the walls with two walls or one wall that is stepped? My
thinking is that if I were starting over I could use the multi-story
construction technique, and just not have a floor or ceiling, if I can
get eQuest to accept this.
Best regards,
Tracy A. Black, P.E.; LEED AP
5002 E Redfield Road
Scottsdale, AZ 85254-2848
h: 602-569-8347
c: 602-332-7197
tblack_pe at cox.net
http://www.linkedin.com/in/tblackpeleedap
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
This email and any files transmitted with it are confidential and intended solely for the addressee. If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.
More information about the Equest-users
mailing list