[Equest-users] Variable Speed Compressor "trick"

Fleming, Joe joe.fleming at tlc-eng.com
Wed Mar 2 14:14:45 PST 2011


I don't know what is causing this, and hopefully someone can shed some light, but when trying to select a "Variable Speed" compressor the option is grayed out for a PSZ?
But, when you follow the subsequent steps you can trick eQuest into making the variable speed compressor option become available.

Change the system to a water source heat pump, assign it to a CW loop, then change it to a PVVT system.  The option to change your compressor to Variable Speed is now available, now change it to a PSZ system and you are good to go!

2 questions;
Does anyone see a problem with simulating Variable/Inverter or digital scroll compressors this way?  (if so, what is the proper way)
And, is there a quicker way to do this w/o having to change the system type 4 times?

Thanks

Joe Fleming
E.I., LEED AP BD+C, BEMP
Mechanical Engineer II

TLC Engineering for Architecture
Your 2030 Challenge Partner

800 Fairway Drive, Suite 250
Deerfield Beach, FL 33441-1816

phone:

954-418-9096

fax:

954-418-9296

direct:

954-418-4591

website:

www.tlc-engineers.com<http://www.tlc-engineers.com/>


[cid:image001.gif at 01CBD8FC.59B2CF40]<http://www.tlc-engineers.com/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110302/2778d4d1/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 5272 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110302/2778d4d1/attachment.gif>


More information about the Equest-users mailing list