[Equest-users] Sub-Metering
Varkie C Thomas
thomasv at iit.edu
Sun Mar 20 16:32:47 PDT 2011
Thank you Patrick. I metered the (1) DHW and (2) Boilers on separate Fuel Meters and the (1) Chillers & Pumps, (2) Mech & Parkg Flrs, (3) Common Areas, and (4) Hotel Rooms on separate Electric Sub-Meters. Varkie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110320/64dbd692/attachment-0003.htm>
-------------- next part --------------
see attached hotel1.imp file.
the file you send is in wizard mode. creating/assigning meters is much
easier in detailed mode.
4 meters created:
em2 = utility
pmpi = submeter for pumping
plhw = submeter for plant chillers
flrs = submeter for the different floors.
you have a master fm1 meter (fuel = gas) so the boilers/hot water
defaults to this.
open the .inp file in notepad, you can "find" the meter definitions in
the electric meters section (elec-meter).
just below that section is the pumps section & you'll note the chw, hw,
and cw loop pumps are assigned to elec-meter = "PMPI"
open the .inp file w/equest (it will probably prompt you to save as a
new project) & stay in detailed edit mode. once in you can pick the
airside tab & open the properties for any of the equipment and change
the meter assignments. may be easier in spreadsheet view.
On 3/19/11 10:24 AM, Varkie C Thomas wrote:
>
> I still cannot do the metering without getting error messages.
> Attached is the project (case study for the website http://bepan.info/
> ) description and eQ .inp & .pd2 files. I want to meter EACH
>
> (1) pumping station (CHW, HW & DHW)
>
> (2) plant equipment (Chillers, Boilers, DHW-heater)
>
> (3) system serving floors for Mechanical, UG-parking, Lobby, Retail,
> Htl-Functions, Htl-Rooms, Restaurant.
>
> The project objective is to compare alternative systems (4P-FCU, WSHP,
> PTAC, ) for the hotel rooms. Metering examples in the DOE22 manuals
> are of no help compared to the DOE21E Supplement. I will making it
> work in DOE21E first
>
> Varkie
>
> *----- Original Message -----*
>
> *Fro*
> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110320/64dbd692/attachment-0004.htm>
More information about the Equest-users
mailing list