[Equest-users] Modeling Multstack Units in eQUEST

[James Geers]

Nick,

                I was reading through archived eQuest posts trying to figure
out the process to model a multistack unit and you post came up. Have you
been able to successfully model the multi-stack unit?  If so could you send
me a screen shot of the waterside  system so I can figure out my layout?   I
saw the post by  Dana Troy and it referenced a diagram, but I was not able
to track it down.

 

Thank you

 

JAMES F. GEERS  |  ARCHITECT, LEED AP:  BD&C, ID, ND, EB, HOMES

513.721.0600 (x107) - DIRECT  

 

SFA ARCHITECTS, INC.

 

CINCINNATI

300 WEST FOURTH STREET  |  CINCINNATI, OHIO 45202  |  513.721.0600 - OFFICE
|  513.721.0611 - FAX

 

DAYTON

120 WEST SECOND STREET  |  SUITE 1800  |  DAYTON, OHIO 45402  |
937.281.0600 - OFFICE  |  937.281.0611 - FAX

 

 
<mailbox://C%7C/Documents%20and%20Settings/David%20Hester/Application%20Data
/Thunderbird/Profiles/q245cdt3.default/Mail/pop.sfa-architects.com/www.sfa-a
rchitects.com> WWW.SFA-ARCHITECTS.COM

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110509/05f90ac4/attachment.htm>