[Equest-users] Water to Water heat pump/exchanger

[Grammy Jiang]

The heat exchanger is only used in cooling tower.

I think you should create a "Ground Loop Heat Exchanger". And this component
can connect to "Lake/Well" loop.

Best Regards,

Grammy, Jiang



On Wed, May 4, 2011 at 23:38, Brett M. West <bwest at rmf.com> wrote:

> I am trying to install a water to water heat pump that is connected to a
> geothermal well field on the source side and a chilled water fan coil system
> on the load side.
>
>
>
> When I create a heat exchanger I don’t see any option to connect to any
> loop that I create. I have created the Lake/Well loop and the chilled water
> loop is connected to a chiller currently. The heat exchanger will be
> replacing the chiller.
>
>
>
> I have searched the boards and found similar issues with no definitive
> answer. Any guidance would be appreciated.
>
>
>
> Thanks in advance,
>
>
>
>
>
> Brett West
>
>
>
> RMF Engineering, Inc**
>
> Ph: 843.971.9639
>
> bwest at rmf.com
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110505/e903912b/attachment-0002.htm>