[Equest-users] assigning exterior usage figures in the detailedmode.

[Bishop, Bill]

Kirti,

 

Exterior loads are entered in Utility & Economics, by selecting the
electric meter in the component tree and scrolling the display to
"Direct Loads - Exterior":

 

 

 

Regards,

Bill

 

 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of kirti
pabrekar
Sent: Wednesday, May 18, 2011 6:27 AM
To: equest-users-request at lists.onebuilding.org;
equest-users at lists.onebuilding.org
Subject: [Equest-users] assigning exterior usage figures in the
detailedmode.

 

Dear all, 

 

I have finished making a model in equest. I am through my baselines and
have realised only now that I have forgotten to put my exterior usage
figures in the wizard mode. Is there a way to assign the same in the
detailed mode. This shall take me closer to my results. 

 

Please suggest, I do not want to enter and rework my way through the
wizard mode. 

 

Thank you

-- 

Regards,
Ar. Kirti Pramod Pabrekar.

IGBC AP, LEED India, 
M. Arch,
Environmental Planning and Design.

 

...Green is a commitment...not a competition...

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110518/d46b9801/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 21686 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110518/d46b9801/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 20862 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110518/d46b9801/attachment-0002.jpeg>