[Equest-users] Desiccant Design Values

[Tim Johnson]

I am working on a desiccant dehumidification system and the desiccant
inputs are very limited.  The program spits out the design values in the
.sim file as shown below.  Can you help me figure out what each variable
is?  Some of them are pretty straight forward, but most of them I can't
figure out.  I haven't been able to find any documentation in the help
files or the forums.  If you could point me in the right direction, I
would appreciate it.
Thanks,
Tim
 
*************DESICCANT DESIGN VALUES *************
 
SYSTEM= RTU-4                           
 
 PA    =  0.1063E+04  TPI   =  0.8300E+02  MPI   =  0.1008E+03
 WBPI  =  0.7185E+02  IML   =  0.1519E+02  MCL   =  0.6333E+02
 HE    =  0.8500E+00  FANE  =  0.5000E+00  MOTORE=  0.8500E+00
 HXE   =  0.0000E+00  DELPHX=  0.0000E+00  EVEFFR=  0.0000E+00
 MODE  =           0
 
TPU   =  0.2528E+03  RBTU  =  0.6364E+05  PAVET =  0.2411E+02
ABVIS =  0.4400E-01  VISCOS=  0.7639E+00  DELPP =  0.9792E+00
PBHP  =  0.3275E+00  PAREA =  0.2044E+01  RAREA =  0.7880E+00
RVEL  =  0.3613E+03  RAVET = -0.9000E+02  DELPR =  0.4239E+00
RBHP =   0.3797E-01  IMR   =  0.4499E+02
 

PVEL  =  0.5200E+03  TPO   =  0.1312E+03  MPO   =  0.3495E+02
VR    =  0.2847E+03  TRI   =  0.3000E+03  RRBTU =  0.7486E+05
PKW   =  0.2874E+00  RKW   =  0.3332E-01  DKW   =  0.4388E+00
TOTKW =  0.7595E+00  IML1  =  0.1519E+02  IML2  =  0.3069E+02
 
 
Tim JohnsonCTA : PE, LEED AP  DIRECT: 208.577.5645 CTA, Inc. | 
www.ctagroup.com1185 W. Grove St. – Boise, ID 83702P: 208.336.4900 – F:
208.343.3531
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110523/043e949a/attachment-0002.htm>