[Equest-users] Heat Recovery from Refrigeration

[Rinkesh Shah]

Hi eQuesters,

I am modeling a big box store that uses heat reclaim loop to recover energy from their refrigeration load.  The store is to be located in Toronto, Canada.
I was wondering if anyone on these boards has had experience with using heat recovery in the refrigeration section of the zones?

I am hesitant on using the numbers I get from the Heat recovery feature in the refrigeration portion, as I can't see the math behind it.
Help files do not explain how this works and the hourly report doesn't have category specific to heat recovery from refrigeration.

Also if anyone has had experience even with what type of % reduction on the heating, that would be useful too.

Thanks,
Smith + Andersen

Rinkesh Shah, B. A. Sc.
Designer - Mechanical
416 487 8151 ext 381
rinkesh.shah at smithandandersen.com<mailto:rinkesh.shah at smithandandersen.com>

4211 Yonge Street Suite 500 Toronto Ontario M2P 2A9
t 416 487 8151 f 416 487 9104  smithandandersen.com

Vancouver  Kelowna  Victoria  Calgary  Edmonton  Toronto  Ottawa  Dubai

Please reconsider printing this email. Help sustain our resources.

This e-mail message and its attachments contain privileged and confidential information and are intended to be seen and used only by the person(s) to whom it is addressed. Any distribution, copying or dissemination of the information herein by anyone other than the addressee is prohibited. If you have received this message in error, please notify the sender immediately and delete this message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111116/dc8e7095/attachment.htm>