[Equest-users] (no subject)

[Oscar B.]

 Hello Chen





I'm not an expert on eQuest but i know that proses loads must be at 
least 25% of the cost of total energy consumption unless you have  
documentation to support the opposite. You have to increase 
miscellaneous loads until you get at least  25% .





I hope that helps





Regads










On 26/11/2011 10:09 p.m., Chen, Ke-Huang wrote:





  Hi 
all,

   

  I am building a 
model for LEED project and I have some questions confused me for a long 
time, does anybody know the answers or can give me some 
suggestions?

   

  1. All the 
property information I have is only a part of all the information 
listed in eQUEST, if I can't find the information in equipment spec., could 
I leave it in default value or I need to find out anyway? If I leave 
it in default value, will it effect the result a lot?

   

  2. The area is 19211 
ft2 in document and I import the Building Area 19211 ft2 in wizard screen 1 of 
25, but after I footprint the shape with CAD file, there is an information 
"Dimensions Specified Above: 17775 ft2". Does it mean the area of this building 
now is 17775 ft2 not 19211 ft2? Will it be accepted if the building area is not 
the same as the document?

   

  3. The reference 
guide shows the process energy should be at least 25% of all energy cost. If the 
process energy is less than 25% after I finish building the model, how could 
I increase the process energy to 25%?

   

   

  Thanks for any 
help.

   

   

   

   

  KeHuang 
Chen

  System Engineer

  IC BT Division

  Siemens Limited 
Taiwan

   

  Tel : (+886)2-2652-8888 ext. 
896

  Mobile : 
(+886)960548011

  Fax : 
(+886)2-2652-8824

   


  

  
  

  _______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG




 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111128/112cdce0/attachment.htm>