[Equest-users] Windows

[Rob Hudson]

If you are customizing the windows in the wizard, then you need to zero out
the % window ratio for each face of the building in the wizard as well.
 Without looking at the model, i got a feeling that it is trying to put
more windows on than you are intending.

Rob

On Thu, Nov 17, 2011 at 11:26 AM, Brian Lo <brianlo at bu.edu> wrote:

> Hello,
> I'm using custom window/door placement to manually input the location and
> size of the windows but when I look at the 3-D model I can't see the
> windows. Does that mean the windows aren't there? I also get this error:
>
> ERROR:  Value being checked = 0.5.  Percent Glass value exceeds maximum
> (based on the window height and the sizes & positions of other windows).
>
> How can i fix these problems?
>
> Thanks,
> Brian
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111117/ada39cd6/attachment-0002.htm>