[Equest-users] Heating load problem

[John Aulbach]

Hard to help you without the model. Do you have a thermostat schedule set up? Do you have a boiler connected?
 John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 


________________________________
From: Baran Tanrıverdi <tanriverdi.baran at gmail.com>
To: equest-users at lists.onebuilding.org 
Sent: Wednesday, November 30, 2011 1:56 PM
Subject: [Equest-users] Heating load problem


Dear group members: 

A problem occured about heating load. I ve chosen both water coils for heating and cooling. After all when i run the simulation, thre is no heating load or any result about heating.

Kind Regards.

-- 
Baran Tanrıverdi



_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111130/f461ab28/attachment-0002.htm>