[Equest-users] eQuest 3-D geometry and Windows 7

[Steven Savich]

Thanks for the suggestion David.  Switching to an non-aero visual theme did
not work, so it may be the graphics card.  I'll see if I can try this out on
a co-worker's Windows 7 machine.

 

Steven

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of David Reddy
Sent: Wednesday, October 19, 2011 11:36 AM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] eQuest 3-D geometry and Windows 7

 

Steven-
I have run into this issue and found the solution to use a non-Aero visual
theme (either permanently set through Control Panel -> Appearance -> Change
the Theme, or you can define themes on an application basis).  I think this
problem is graphics card dependent, but not entirely sure.

Hope this helps, 
David

On 10/19/2011 10:01 AM, Steven Savich wrote: 

Has anyone else had an issue with 3D geometry display and Windows 7?

 

I've tried opening a number of different projects with versions 3.61e (build
5653), 3.63 (build 6510), and 3.64 (build 7130) and the 3D geometry will not
display on my Windows 7 desktop, but will display just fine when I run the
models on an older XP machine with the same versions of eQuest.  Anyone know
of a fix for this?

 

Thanks in advance,

Steven

 

Steven Savich, LEED AP

Systems West Engineers

411 High Street

Eugene, OR  97401-2427

(541) 342-7210

(541) 342-7220 (fax)

 






_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111019/06665319/attachment-0002.htm>