[Equest-users] Wizard BDL Error When Defining Custom Zones

[Paul Diglio]

Patrick:

The HVAC unit is assigned for each zone I enter.   Initially, I had one zone per 
floor.  When I started to add custom zones I made sure that each zone on screen 
14 of the shell create/modify wizard is assigned to the hvac system.

I am unsure of what the error message means so I am having difficulty correcting 
it.   I even tried to create custom zones on the second floor of this building 
and I get the same error, but I was able to create custom zones in the basement 
of this building without any errors.

Sincerely,

Paul Diglio




________________________________
From: "Patrick J. O'Leary, Jr." <poleary1969 at gmail.com>
To: equest-users <equest-users at lists.onebuilding.org>
Sent: Tue, September 13, 2011 11:36:31 AM
Subject: Re: [Equest-users] Wizard BDL Error When Defining Custom Zones

is there an hvac unit already created without assignments?  or assigned per 
floor so if the floor zoning isn't done the error is returned?

On 9/13/11 8:25 AM, Paul Diglio wrote: 
Patrick:
>
>Yes I am closing out before finishing the zoning but I have done so successfully 
>on other models and the basement level of this model.
>
>I even tried defining several large zones in this model on the floor that is 
>causing me problems and I still get the errors.  I do not get errors if I choose 
>one zone per floor.
>
>Thanks for your response,
>
>Paul Diglio 
>
>
>
>
________________________________
From: "Patrick J. O'Leary, Jr." <poleary1969 at gmail.com>
>To: equest-users at lists.onebuilding.org
>Sent: Tue, September 13, 2011 10:37:23 AM
>Subject: Re: [Equest-users] Wizard BDL Error When Defining Custom Zones
>
> looks like you're closing out of equest/wizard without finishing your zoning?  
>so equest does a check on the entire model & finds zones without hvac 
>assignments & returns the error.
>
>On 9/13/11 5:39 AM, Paul Diglio wrote: 
>Dear eQuesters:
>>
>>I am having a problem defining custom zones in the DD Wizard.
>>
>>I can add one zone no problem.  Please see attached maplewood zone 1.jpg
>>
>>When I try to add the second zone (maplewood zone 2.jpg)  I get the three zone 
>>error messages.jpg attached.
>>
>>I typically add zones in this manner and have not had a problem before.  Any 
>>ideas?
>>
>>Thank you,
>>
>>Paul Diglio
>>
>> _______________________________________________ Equest-users mailing list 
>>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org To 
>>unsubscribe from this mailing list send  a blank message to 
>>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG 
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/4e077049/attachment-0002.htm>