[Equest-users] Materials for baseline design

[Jiao, Joey]

Kelsey VanTassel KVanTassel at sustaineng.com
<mailto:equest-users%40lists.onebuilding.org?Subject=Re%3A%20%5BEquest-u
sers%5D%20Materials%20for%20baseline%20design&In-Reply-To=%3C82422C2EAD6
92049B1510B658F5C9E055432F18764%40SEGSERVER.seg.lan%3E> 
Tue Mar 1 06:49:26 PST 2011

*	Previous message: [Equest-users] Materials for baseline design
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/007970.html> 
*	Next message: [Equest-users] Materials for baseline design
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/007978.html> 
*	Messages sorted by: [ date ]
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/date.html#7972>  [ thread ]
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/thread.html#7972>  [ subject ]
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/subject.html#7972>  [ author ]
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/author.html#7972> 

________________________________

You can create custom constructions with the following layers. You will
need to adjust the thickness of the insulation layers slightly to
achieve the exact U-factor (inverse of overall R-value), but here is a
good starting point:
 
Roof (see A2.2.1): Built-up roofing, Polystyrene 4 in (R-5/in)
Walls (see A3.3.1): 1" Stucco, 2 in Polystyrene, create a material based
on resistance with a R-value of 6.0 to represent the effective R-value
of the steel studs plus batt insulation (Table A3.3), 5/8 in gypsum wall
board.
 
Kelsey Van Tassel
Mechanical Engineer | kvantassel at sustaineng.com
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
<mailto:kvantassel at sustaineng.com
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
>
608.836.4488 ext. 20 | Fax: 608.836.4477
 
Sustainable Engineering Group
901 Deming Way, Suite 201
Madison, WI 53717
www.sustaineng.com<http://www.sustaineng.com/>
 
 
From: equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
[mailto:equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
] On Behalf Of Loukiashenko Kseniya
Sent: Tuesday, March 01, 2011 4:08 AM
To: equest-users at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

Subject: [Equest-users] Materials for baseline design
 
 
Hello all,
 
We are using eQuest for LEED and we are to create a baseline design of
our building. Characteristics for baseline construction materials
(walls,roof,floor, etc) must be equal to ASHRAE 90.1 (for our zone it is
table 5.5-6, p.24) data:
 
Roof - Insulation entirely above deck - U-0.048 / R-20.0 c.i.
Walls - Steel framed - U-0.064 / R-13.0+R-7.5c.i.
Slab-on-grade floors - unheated - F-0.540 / R-10 for 24 in.
 
Can anyone help to choose appropriate consructions/materials from eQuest
screen?
We are not sure what to choose as we are located in Europe and use
another parametrs and names.
 
Thank you!
 
 
Kseniya L.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/att
achments/20110301/ca3e1d33/attachment.htm>

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110920/fc88058d/attachment-0002.htm>