[Equest-users] Load Profiles

[Alex Blue]

Hi Brian,

It is possible to calculate it by counting workstations and finding some reasonable values online for the office equipment.  ASHRAE also publishes some values you can use in the Handbook and in the pocket guide.

Alex

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Brian Lo
Sent: April 19, 2012 9:45 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Load Profiles

Hi,
I am having problems finding the loads for office equipment, motors and air compressors. In the office equipment loads and profile page, it asks for office Eq (w/sqft) for the office, corridor, ect. Am I supposed to be able to calculate this from building plans or is there a standard value I should be using?

Thanks,
Brian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120419/d5e68966/attachment-0002.htm>