[Equest-users] Modelling an exhaust fan

[R B]

Set is as relief fan in the systems-fan tab
-Rohini
On Fri, Apr 20, 2012 at 1:24 PM, Behnam Jowkar <bjowkar at fluentgroup.com>wrote:

>  Hi Guys,
>
>   I am modelling an AHU with exhaust fan, which comes on only during
> economizing, but I can not figure out how to properly model it in eQuest.
> Can anyone help me with this?
>
>  Regards,
>
>    --
> *Behnam Jowkar, MASc
> *Energy Services Associate
>
>  Fluent Group Consulting Engineers Inc.
>  295A Broadway Avenue, Second Floor
> P.O. Box 188, Orangeville, Ontario, L9W 2Z6
>  *t* 888.358.3683 x704  *f* 866.620.7502  *c* 519.938.7657
> www.fluentgroup.com
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120420/faf23f5f/attachment-0002.htm>