[Equest-users] OA schedule

Jeremy McClanathan jmcclanathan at CDiengineers.com
Fri Apr 27 09:57:03 PDT 2012

-999 means use input values rather than scheduled values.  If you want the program to use input values for a period of time, then override the input with 0 for another period of time, you have to use -999 for the times you want the program to use input values.  Blank may not mean the same thing as -999.

Jeremy McClanathan, P.E., BEMP, HFDP, LEED® AP BD+C

4200 194th St SW, Ste 200, Lynnwood, WA 98036
P 425-672-1071 | F 425-778-8769
??Please consider the environment before printing this email.

-----Original Message-----
From: sambhav tiwari [mailto:tiwari.sambhav at gmail.com]
Sent: Friday, April 27, 2012 9:45 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] OA schedule

Hi All,
          It is necessary to specify the min OA schedule as -999 for occupied and 0 for unoccupied hrs at either system or zone level or it can be skipped.

Equest-users mailing list
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

This email message, including any attachments, is for the sole use of the intended recipient and may contain confidential, proprietary, and/or privileged information, as well as content subject to copyright and other intellectual laws. If you are not the intended recipient, you may not disclose, use, copy, or distribute the email message or its attachments. If you believe you have received this email message in error, please contact the sender by reply email, immediately delete this email and destroy copies.

More information about the Equest-users mailing list