[Equest-users] Chiller Sequencing and Chiller Curves
Peter Baumstark
pbaumstark at sbcglobal.net
Fri Aug 31 21:10:37 PDT 2012
The only tutorial I've seen that includes custom chiller curves is this one:
http://www.energydesignresources.com/resources/publications/design-guidelines/design-guidelines-hvac-simulation-guidelines.aspx
Pete
________________________________
From: R B <slv3sat at gmail.com>
To: Jeff Ross-Bain <jeff at rbgb.com>
Cc: equest-users at lists.onebuilding.org
Sent: Fri, August 31, 2012 7:25:07 AM
Subject: Re: [Equest-users] Chiller Sequencing and Chiller Curves
For the first question -
You can use equipment control to set the efficient chiller sequence as 1 and the
other as 2, and prorate load as no.
-Rohini
On Fri, Aug 31, 2012 at 9:08 AM, Jeff Ross-Bain <jeff at rbgb.com> wrote:
HI All,
>
>Two questions regarding chillers:
>
>1. Is it possible to establish a schedule to where one main chiller (a new
>efficient one) operates all the time and a second chiller (old energy hog one)
>only comes on line to cover peak conditions?
>2. Is there a good tutorial out there for inputting custom chiller part
>load data and or curves?
>
>Many thanks!
>
>Jeff Ross-Bain, PE, LEED AP BD+C, BEMP
>Principal
>404-220-8940 Office
>404-220-8955 Direct
>www.rbgb.com
>
>Build Green. Save Time
>
>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send a blank message to
>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120831/022dffbf/attachment-0001.htm>
More information about the Equest-users
mailing list