[Equest-users] Loop-to-loop HP double counts electricity

[Michael Wilson]

I'm hoping someone might know what this problem is. Its occurred in two
separate projects for me.

 

I'm modelling a loop-to-loop HP. Everything seems to work fine at the plant
level. The plant reports assign the correct loads and electricity
consumption to the HP. But in the BEPS and economics reports, the
electricity for heating and equipment is exactly double that of the HP.
Looking at the hourly meter reports, every hour the correct kW is assigned
to heating, but then an equal amount is assigned to either equipment or
sometimes split between equipment and heating.

 

Any ideas?

 

Thanks

 

Michael Wilson, P.Eng.

PO Box 1911 - 458 Abbs Rd.

Gibsons, BC  V0N 1V0

604-886-9864

www.enerficiency.ca

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120213/be736f01/attachment.htm>