[Equest-users] ERV Output

[Brian Fountain]

ERV fan power is not included in the SV-A.  It is included in the ERV 
report as stated below.  It is included in fan energy in the BEPS, PS-E 
etc. reports.



On 2/8/2012 12:43 PM, Umesh Atre wrote:
> The ERV output is a separate report called ERV Energy Recovery 
> Summary. You should be able to find this located after the SS-P and 
> SS-Q reports, or just
> Ctrl+F and search for ERV.
> ------------------------------------------------------------------------
> *From:* equest-users-bounces at lists.onebuilding.org 
> [mailto:equest-users-bounces at lists.onebuilding.org] *On Behalf Of 
> *Caleb Freeman
> *Sent:* Wednesday, February 08, 2012 12:05 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] ERV Output
>
> I have created a simulation with an energy recovery ventilator/cooling 
> unit.  I cannot figure out where the supply/exhaust fan power is shown 
> on the output reports.  I would expect it to be a part of the SV-A 
> report for the system, however the total KW I input is not reflected 
> in the kW output.
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120208/fb36f77b/attachment-0002.htm>