[Equest-users] Modeling incremental HVAC units

[John Aulbach]

Hi Erik and welcome to the forum (and the war..)
 
Try PSZ (Package single zone). It can do all that you are asking.
 John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
2154 Torrance Blvd, Ste. 100, Torrance, CA 90501
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 
 


________________________________
From: Erik Rutherford <eriksrutherford at gmail.com>
To: equest-users at lists.onebuilding.org 
Sent: Thursday, February 9, 2012 9:20 AM
Subject: [Equest-users] Modeling incremental HVAC units


I am new to eQuest, and I would like to model a building that primarily uses 'through-the-wall' incremental HVAC units for heating/cooling with DX coils for cooling and hot water coils for heating. I didn't see an explicit option for this configuration in the list of System Types. Any tips for modeling this system? Thanks
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120209/4776923a/attachment-0002.htm>