[Equest-users] Fan pressure
Javed Iqbal
eee.javed at gmail.com
Wed Jul 11 02:06:26 PDT 2012
Hi,
Please check help file for this. It says:
SUPPLY-STATIC
*Total static pressure* of the supply fan at design flow rate. Pressure
losses should include filters, coils, fan housing, and distribution system.
Use either SUPPLY-STATIC and SUPPLY-EFF or SUPPLY-DELTA-T and
SUPPLY-KW/FLOW.
Thanks!
On Wed, Jul 11, 2012 at 2:19 PM, sambhav tiwari <tiwari.sambhav at gmail.com>wrote:
> Hi All,
> Does the pressure input asked in fan power control tab in
> WG is only the static fan pressure or the total pressure ie(static
> +velocity pressure) . If only static pressure than where is the
> velocity pressure accounted in simulation.
>
> Thanks
> Sambhav.
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
--
Javed Iqbal, LEED AP, CEA
Energy Analyst
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120711/0203d37e/attachment-0002.htm>
More information about the Equest-users
mailing list