[Equest-users] Latitude and longitude values in eQUEST

[bfountain at greensim.com]

Not directly.  However you can select a US location with the same 90.1 climate zone and run the compliance tool to get a start point for your reference building which you subsequently edit in the detailed interface. 
------Original Message------
From: Eleni Soulti
To: Brian Fountain
To: equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Latitude and longitude values in eQUEST
Sent: Jul 19, 2012 2:21 AM

Hi, Thanks for your answer.
Does that mean that eQUEST can't compare my building to a baseline building
as required for LEED EAp2 and EAc1?

Eleni Soulti
elenisoulti at co2engineering.eu



-----Original Message-----
From: bfountain at greensim.com [mailto:bfountain at greensim.com] 
Sent: 18 July 2012 23:11
To: Eleni Soulti; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Latitude and longitude values in eQUEST

The LEED compliance is not set up for international locations at this point.


Brian Fountain
bfountain at greensim.com

-----Original Message-----
From: "Eleni Soulti" <elenisoulti at co2engineering.eu>
Sender: equest-users-bounces at lists.onebuilding.org
Date: Wed, 18 Jul 2012 23:08:05 
To: <equest-users at lists.onebuilding.org>; <bldg-sim at lists.onebuilding.org>
Subject: [Equest-users] Latitude and longitude values in eQUEST

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



Brian Fountain
bfountain at greensim.com