[Equest-users] Central Chilled Water Plant Serving BuildingOutside the LEED Boundary Area

[冷面寒枪]

you can reference to 2.4.2 in "Treatment of District or Campus Thermal Energy in LEED"




------------------ Original ------------------
From: "Chris Jones"; 
Date: 2012年7月24日(星期二) 晚上10:32
To: "Wallie Padero"; "equest-users"; 
Subject: Re: [Equest-users] Central Chilled Water Plant Serving BuildingOutside the LEED Boundary Area



Have you read the DES documentation from the USGBC?  I believe you 
have to follow those protocols.


At 01:44 AM 24/07/2012, Wallie Padero wrote:
>Dear E-quest users,
>
>I'm currently modeling a new construction building served by a 
>central chilled water plant. The central chilled water plant also 
>serves building outside the LEED boundary area. The total capacity 
>of the central chilled water plant is approximately 1370 TR (Two 685 
>TR Water Cooled Chillers) but the building i'm modeling within the 
>LEED boundary is just 150 TR.
>
>Is this under DES? But i don't have any idea on what chilled water 
>utility rate should be used?
>
>Please help me on what modeling strategy should be done on this case?
>
>Thanks in advance.
>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to 
>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 >>
Christopher Jones, P.Eng.
Suite 1801, 1 Yonge Street
Toronto, ON M5E1W7
Tel. 416-203-7465
Fax. 416-946-1005
email cj at enersave.ca

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120725/5e2447dd/attachment-0001.htm>