[Equest-users] How to let eQuest running faster or more responsive?

Tai Lieu tailieu at gmail.com
Fri Nov 9 10:15:21 PST 2012

Hi, Has there been a follow up to this thread.  I'd like to know if there's
been a resolution.  I'm running a quad core processor as well. I've noticed
that the processing time will always run on one core (25%) as oppose to
using all four (100%)

---------- Forwarded message ----------
From: Chris Jones <cj at enersave.ca>
To: rogerspass <rogerspass at gmail.com>,equest-users at lists.onebuilding.org
Date: Mon, 05 Nov 2012 11:32:47 -0500
Subject: Re: [Equest-users] How to let eQuest running faster or more
Can you post your model, I would like to compare the equest time against
running using DOE2.2 at the command line.

At 02:23 AM 01-11-2012, rogerspass wrote:

> Hi All: I'm doing some high-rise buildings in detail mode. And I found
> that eQuest becomes kinda sluggish or not that responsive. Sometimes, the
> BDL file can have more than 500,000 lines thus it takes more than 30min to
> load. If I change a parameter, it also takes quite a while to update. My
> computer is i7-2600k with 16GB in Windows 7 64bit. The CPU loading is just
> around 25% - 30%. Does anyone know how to make it faster or more
> responsive? Thanks.
> Roger
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to

Christopher Jones, P.Eng.
Suite 1801, 1 Yonge Street
Toronto, ON M5E1W7
Tel. 416-203-7465
Fax. 416-946-1005
email cj at enersave.ca

Tai Lieu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121109/be729404/attachment-0002.htm>

More information about the Equest-users mailing list