[Equest-users] No Plenum zones

[John Aulbach]

Michael:

On the Screen 2 Building Footprint, there is a "Floor Heights" area, broken up into "Flr to Flr" and "Flr to clg". The difference in your inputs will define the Plenum.

John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________
 
PartnerEnergy
2154 Torrance Blvd, Ste. 100, Torrance, CA 90501
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 
 


________________________________
 From: Michael Campbell <mike at sustainablesolutionscorporation.com>
To: equest-users at lists.onebuilding.org 
Sent: Tuesday, October 2, 2012 9:19 AM
Subject: [Equest-users] No Plenum zones
 

Hello,
 
I’m working on creating my zones in a model and when I move to detailed mode, I don’t see any plenum zones.  I have my HVAC system as split system heat pump with one system per zone.  How do I get the wizard to create plenum zones?
 
Thanks,
 
Mike Campbell E.I.T., LEED AP O+M
Sustainability Specialist 
Sustainable Solutions Corporation
Office: 610-569-1047  
www.SustainableSolutionsCorporation.com
Sustainable Solutions Corporation is WBENC and BCorp Certified.
 
This email message and any attachments are for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message and any attachments.
 
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121002/49eae980/attachment-0002.htm>