[Equest-users] eQuest deleting wall construction during simulation

[Jeremy Larson]

Hi Forum,

I am simulating a 3-story building for compliance to California's Title
24. When I run a compliance analysis for permit the program performs the
error check passing the "Initializing Ruleset and Examining Inputs." It
then generates the proposed building but hangs at the end and deletes
all the wall construction assignments for every wall in the simulation
yielding 566 errors. I cannot figure out why it keeps deleting the
construction assignments nor can I get past this step for compliance
generation. Has anyone had a similar experience - help in any way is
much appreciated.

Thanks,

Jeremy

 

JEREMY LARSON,  PE, LEED(r) A.P.

Mechanical Engineer

emanuelson-podas, inc.

Phone: 952.930.0050

Direct:  952.540.4033

Fax:  952.930.0777

www.epinc.net <http://www.epinc.net/> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120921/47b9b624/attachment.htm>