[Equest-users] RH in hourly reports

[Robby Oylear]

What system are you using?  If it's not a zonal system you likely cannot
get return air humidity ratio.  I've had success getting Var 36 "Mix air
humidity ratio (lb H20/lb dry air)" in the past on PVVT systems.

-Robby

On Fri, Sep 7, 2012 at 12:34 AM, sambhav tiwari <tiwari.sambhav at gmail.com>wrote:

> Hi All,
>          In my hourly reports output under variable type as thermal
> zone i selected three variables 1 Zone unit return humidity ratio 2
> Zone unit mixed humidity ratio 3 Zone unit humdity ratio of air
> leaving the cooling coil.
>
> But i exported the hourly results to excel i am getting the values as
> zero for these three parameters for all occupied hours however if i
> select other parameters under thermal zone i am getting the values.
>
> Kindly if anyone can help it out.
>
> Thanks
> Sambhav
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120907/528077e8/attachment-0001.htm>