[Equest-users] Different CFM for ASHRAE Case and Proposed Case

[GK Pandian]

Rakesh,



Yes you can change the cfm in proposed model and make sure it’s reflecting
your actual design. This is how we account the savings in proposed model.



Thanks

Gopi


On Thu, Apr 18, 2013 at 11:48 AM, Rakesh Desai <rakeshdesai at ecpl.co.in>wrote:

>  Hi,****
>
> ** **
>
> While modeling a building, I arrive at fan CFM for ASHRAE Case. Is it
> possible to change the CFM for the same HVAC system or thermal zone in
> proposed case? Because in proposed case, I change envelope and façade which
> reduces my heat gain and thus the same HVAC system or thermal zone would
> require less CFM.****
>
> ** **
>
> e.g. in ASHRAE case I get 1000 CFM and in proposed case, I can manage with
> 800 CFM.****
>
> ** **
>
> With best regards,****
>
> ** **
>
> Rakesh Desai****
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130418/7a4643f1/attachment-0002.htm>