[Equest-users] Louvers on Solid Surface

[The Watt Doctors - Dave Weigel]

The louvers are there to shade the wall and reflect the sun for the south exposure, no?  If so, you can model a bunch of individual shades that match the configuration of the louvers. Or, you can make one big shade if the sun will never hit the wall...

From: Omar Osama 
Sent: Wednesday, December 25, 2013 3:55 AM
To: equest 
Subject: [Equest-users] Louvers on Solid Surface

Dear all, 
            I need to know the best way to model aluminum louvers that is placed on an exterior brick wall on a southern elevation. Should I create exterior walls that resembles the louvers for each zone,, or assume a very low U-value for this wall, or there is an appropriate way that the software allow for this case?
Any help would be highly appreciable,

Regards,

  Omar ElRawy
  Project Engineer,
  EA Sustainable Building Consultants
  www.ea-buildingconsultants.com

--------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20131225/7c1075f9/attachment-0001.htm>